-
In which fields are high-strength stainless steel coils suitable for application
This question focuses on the application scenarios of high-strength stainless steel coils, capturing the value point of their "high-strength" core characteristics. The core advantage of high-strength stainless steel coils is that they not only possess basic properties such as corrosion resistance and high temperature resistance, but also have higher tensile strength and fatigue resistance. They ar
2025-10-27 -
Where is the long-term economy of stainless steel strip reflected
The long-term economic core of stainless steel strip is reflected in three dimensions: low maintenance cost, long service life, and high material utilization rate. Although the initial procurement cost is higher than that of ordinary steel, the total cost of the entire life cycle is significantly lower.
2025-10-21 -
Introduce the basic treatment process of stainless steel coils
The basic treatment process of stainless steel coils refers to the core pretreatment process carried out from "stainless steel hot-rolled/cold-rolled coil products" to "downstream processing applications" to optimize their surface state, performance stability, and processing adaptability. It mainly revolves around the three goals of "surface cleaning, defect repair, and performance adjustment". Th
2025-10-14 -
What are the processing advantages of stainless steel strips
The processing advantage of stainless steel strip is essentially its dual advantage in material characteristics and process compatibility - it can adapt to various mainstream metal processing processes, maintain stable performance and controllable accuracy during the processing, while reducing processing difficulty and cost, and meeting the needs of different fields for "complex shapes, high preci
2025-10-10 -
What are the unique alloy compositions of stainless steel coils
The unique alloy composition core of stainless steel coils is chromium (Cr) and nickel (Ni), combined with elements such as carbon (C), molybdenum (Mo), titanium (Ti), etc., forming diverse properties through different proportions to adapt to different usage scenarios (such as rust prevention, high temperature resistance, and corrosion resistance).
2025-09-29 -
Introduce the processing techniques that affect the surface hardness of stainless steel strips
The processing technology that affects the surface hardness of stainless steel strips revolves around two main logics: "cold working deformation" and "heat treatment control". By changing the internal crystal structure of stainless steel strips (such as grain refinement and internal stress accumulation), their surface and overall hardness are directly determined. Among them, cold rolling process i
2025-09-23 -
What are the surface treatment processes for stainless steel coils
The surface treatment process of stainless steel coils can be divided into three categories according to core requirements, which are simplified as follows: 1、 Basic treatment: Bottom layer to remove defects Degreasing: Use cleaning agents/ultrasonic waves to remove oil stains and fingerprints, preparing for subsequent processes, suitable for pre-treatment of all roll materials. Acid pickling:
2025-09-16 -
Where is the corrosion resistance of stainless steel strip reflected
The corrosion resistance of stainless steel strips does not stem from the material's "non rusting" properties, but rather from its formation of an "active defense system" against environmental media (such as oxygen, water, acid-base solutions, etc.) through specific composition design and surface passivation mechanisms. The core is reflected in the following three aspects:
2025-09-09 -
What are the applications of stainless steel coils in mining equipment
Stainless steel coils are widely used in mining equipment (including mining, oil and gas mining, deep-sea mineral mining, etc.) due to their excellent corrosion resistance, high strength, and processability. The core is to solve the pain points of "high corrosion, high wear, and complex working conditions" in mining environments. Specific applications can be divided into the following categories a
2025-09-03 -
Briefly introduce the tensile strength of stainless steel strip
The tensile strength of stainless steel strip refers to the ratio of the maximum tensile force it can withstand to the cross-sectional area before tensile fracture (usually measured in MPa), which is the core mechanical indicator for measuring its tensile resistance. The main characteristics and key information can be summarized as the following three points:
2025-08-26
- 10-272025
In which fields are high-strength stainless steel coils suitable for application
This question focuses on the application scenarios of high-strength stainless steel coils, capturing the value point of their "high-strength" core characteristics. The core advantage of high-strength stainless steel coils is that they not only possess basic properties such as corrosion resistance and high temperature resistance, but also have higher tensile strength and fatigue resistance. They ar
- 10-212025
Where is the long-term economy of stainless steel strip reflected
The long-term economic core of stainless steel strip is reflected in three dimensions: low maintenance cost, long service life, and high material utilization rate. Although the initial procurement cost is higher than that of ordinary steel, the total cost of the entire life cycle is significantly lower.
- 10-142025
Introduce the basic treatment process of stainless steel coils
The basic treatment process of stainless steel coils refers to the core pretreatment process carried out from "stainless steel hot-rolled/cold-rolled coil products" to "downstream processing applications" to optimize their surface state, performance stability, and processing adaptability. It mainly revolves around the three goals of "surface cleaning, defect repair, and performance adjustment". Th
- 10-102025
What are the processing advantages of stainless steel strips
The processing advantage of stainless steel strip is essentially its dual advantage in material characteristics and process compatibility - it can adapt to various mainstream metal processing processes, maintain stable performance and controllable accuracy during the processing, while reducing processing difficulty and cost, and meeting the needs of different fields for "complex shapes, high preci
- 09-292025
What are the unique alloy compositions of stainless steel coils
The unique alloy composition core of stainless steel coils is chromium (Cr) and nickel (Ni), combined with elements such as carbon (C), molybdenum (Mo), titanium (Ti), etc., forming diverse properties through different proportions to adapt to different usage scenarios (such as rust prevention, high temperature resistance, and corrosion resistance).
Jiangsu Lichao New Material Technology Co., Ltd.
WeChat ID:www.19miao.com
Add WeChat
Contact us
The phone